Description STM32F103C8T6 Microcontroller
STM32f103c8t6 is a very low cost medium density wich incorporates very high and advanced perfromance of ARM Cortex M 32 Bit RISC architecture operates on 72 MHz frequency with high speed and embedded internal memories. It is equipped with enhanced range of Input output pins connected with two APB buses for performance, integrated with flash memory 128 Kbytes and SRAM 20 Kbytes inside.
All supported devices offers two 12 bit Analog to Digital convertor ADC, general purpose 3 timers 16 bit each and one PWM timer, which make these devices highly versatile and reliable in terms of speed and accurace. I can communicate I2C, SPI and USB, USART and CAN bus controller. All devices can run on low power from 2.0 to 3.6 volts power supply and can operate on temperature range from -40 to +85 degree temperature.
An advanced and comprehensive power utitlity management makes it a low power device for applications. Download STM32f103c8t6 Datasheet and see the all advanced features of the device. Device STM32f103c8t6 available in six different packages types from 36 pins to 100 pins and can be used as per the applications.
Different types of internal peripherals are available as per device type and user can make its choice as per the application that what types of features he is looking for. These features makes this devices suitable for all embedded applications from driving motors, leds, medical, domestic, household equipments, PC and Gaming, GPS integrations, Industrial applications and softwares, Inverters, PLCs, alarm systems etc.
All features Specification STM32F103C8T6 Download Datasheet
ARM32-bit Cortex-M3 CPU Core.
72 MHz maximum frequency,1.25 DMIPS/MHz.
Single-cycle multiplication and hardware division.
Memories 64 or 128 Kbytes of Flash memory, 20 Kbytes of SRAM.
Clock, reset and supply management., 2.0 to 3.6 V application supply and I/Os. POR, PDR, and programmable voltage detector (PVD). 4-to-16 MHz crystal oscillator, Internal 8 MHz factory-trimmed RC. Internal 40 kHz RC, PLL for CPU clock. 32 kHz oscillator for RTC with calibration. Low-power Sleep, Stop and Standby modes. VBAT supply for RTC and backup registers.
2 x 12-bit, 1 μs A/D converters (up to 16 channels). Conversion range: 0 to 3.6 V, Dual-sample and hold capability Temperature sensor. 7-channel DMA controller, Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs, Up to 80 fast I/O ports, 26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant.
Debug mode, Serial wire debug (SWD) & JTAG interfaces, 7 timers
Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input 16-bit, motor control PWM timer with dead-time generation and emergency stop 2 watchdog timers (Independent and Window), SysTick timer 24-bit downcounter
Up to 9 communication interfaces, Up to 2 x I2C interfaces (SMBus/PMBus)
Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
Up to 2 SPIs (18 Mbit/s), CAN interface (2.0B Active)
USB 2.0 full-speed interface, CRC calculation unit, 96-bit unique ID.